ARACO AC PUTTY
ARACO AC PUTTY is a high quality, copolymer-based putty for walls and ceilings to improve adhesion between the wall and top coat material. ARACO AC PUTTY can be applied manually by steel trowel or stucco knife. After drying, it forms smooth putty with excellent adhesion properties to cement-based plaster, cement-based putties, and gypsum boards. It’s specially manufactured for the painter to repair and touch-up surfaces, both old and new, prior to painting. ARACO AC Putty meets the following technical material requirements when tested in accordance with ASTM C661, ASTM C719, ASTM C793, A STM C794, and ASTM D4758.
ARACO GROUT 150
ARACO GROUT 150 is a high performance, non-shrinkage compensating with special formulation blended with high performance cements and polymers. It can be easily mixed for grouting and anchoring. ARACO GROUT 150 contains no iron particles, chlorides or gypsum, and will not corrode, shrink, rust or ravel even under moist conditions. it is a readyto- use product in powder form, which requires only the onsite addition of water to produce a non-shrink grout of predictable performance. ARACO GROUT 150 is a development of typical properties of the pre-mixed polymer modified mortars.
ARACO REP FFR
ARACO REP FFR is a one-component & ready mixed putty for smoothing internal and external surfaces prior to painting and coating applications. ARACO REP FFR is a development of typical properties of the pre-mixed polymer modified mortars meets the requirements for ASTM C 185- 02 section 5.2 and BS EN 196-1.
ARACO REP 350
ARACO REP 350 is a single component, cement-based, polymer modified,shrinkage compensated repair mortar. When mixed with water, it provides a shrinkage compensated, self-compacting and free flowing microconcrete suitable for large volume concrete repairs. After drying, it gives a high strength repair mortar with excellent bond properties to concrete and steel reinforcement. ARACO REP 350 is a durable, low permeability chloride free mortar. A typical application is the re-profiling of damaged concrete members.
ARACO REP TX
ARACO REP TX is a one-component special formulated polymer-modified non-sag concrete repair mortar. ARACO REP TX is a multi-purpose concrete repair mortar which can be applied by trowel or by wet spraying machine. ARACO REP TX is a development of typical properties of the premixed polymer modified mortars meets the requirements for ASTM C-109 and BS EN 196-1.
ARACO EPO REP
ARACO EPO REP is a two component, epoxy based, thixotropic, solvent-free, high strength adhesive and batching compound. ARACO EPO REP is specially formulated to bond concrete to concrete, construction materials to concrete, and for general grouting and repair work. The thixotropic nature of ARACO EPO REP allows it to function in vertical and over-headed situation without sagging while maintaining excellent bond.